These clips are installed on the bottom ends of the shroud. Provisions are molded into the shroud allowing attachment of the shroud to the radiator. Each vehicle requires two clips. This is a 2-piece kit.
Fits:
1967-69 Camaro
1967-69 Firebird
1968-72 Chevelle

Rubber bumper that fits on top of the hood adjustment screw. Includes 2 bumpers.
Fits:
1967-81 Camaro
1967-81 Firebird
1964-72 Chevelle
1964-72 El Camino

Wiring harness plastic straps. Includes 2 straps.

Fits:
1967-69 Camaro
1967-69 Firebird
1964-72 Chevelle

Plastic loop straps for holding washer hose to fender. 2 pieces
Fits:
1967-81 Camaro
1967-81 Firebird
1968-72 Chevelle
1968-72 El Camino

Reproduction of the park light wiring grommet for all 1967-69 Camaro RS models. Sold in a pair. .

Reproduction battery tray clamp. Manufactured in steel as original. Mounting screw included.
Fits:
1967-81 Camaro
1967-81 Firebird
1964-72 Chevelle

Reproduction of the big block heater core gasket for use on all 1967-69 Camaro models.

This hose bracket was attached to the top of the alternator and held the heater hose in place. This is a excellent reproduction of the original.
Fits:
1968-69 Camaro
1968-69 Firebird
1968-72 Chevelle
1968-72 el Camino

Reproduction of the original battery junction block. This items is used to provide a junction point for your battery to your wiring harness by isolating it from the body.
Fits:
1967-69 Camaro
1967-69 Firebird
1968-69 Chevelle

This hose clip is designed to secure a pair of heater hoses to the inner fender skirt to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance. This is a excellent reproduction of the original.
Fits:
1967-69 Camaro
196-69 Firebird
1968-72 Chevelle
1968-72 El Camino

Accurate reproduction of the 1967-69 Camaro/Firebird and 1968-72 Chevelle firewall wire gutter with correct exterior finish and slotted mounting holes. Includes correct size, plated mounting screws.
Fits:
1967-69 Camaro
1968-72 Chevelle
1967-69 Firebird

Correct Bumper and screw assembly to adjust front of hood height. Includes 2 bumpers and 2 screws.
Fits:
1967-81 Camaro
1967-81 Firebird
1964-72 Chevelle
1964-72 El Camino

Reproduction of the original 1969 Camaro fan shroud bracket used to hold the fan shroud in place. The bracket attaches to the upper portion of the shroud and connects to the radiator support. This simple design is for use with 1969 Camaro big block models only.

Correct reproduction hardware to install factory style radiator.

Fits:
1967-68 Camaro
1967-68 Firebird

Correct reproduction hardware to install factory style radiator.

Fits:
1969 Camaro
1969 Firebird

Elbow that inserts into the RH passenger side valve cover and completes the connection to the air cleaner hose. For 1967-70 Big Block with 1"i.d. x 3 1/2" L w/90° bend.
Fits:
1967-70 Camaro
1966-70 Chevelle
1966-70 El Camino

Reproduction of the original battery tray. Stamped steel reproduction in EDP primer.

Fits:
1967-69 Camaro
1967-69 Firebird
1966 Chevelle

Elbow that inserts into the RH passenger side valve cover and completes the connection to the air cleaner hose. For 1969-72 small block with 3/4"o.d. x 3 1/2" L w/90° bend
Fits:
1969-72 Camaro
1969-72 Chevelle
1969-72 El Camino

Correct reproduction of the original fan shroud bracket for 1967-68 Camaro big blocks and 1967-69 small block Camaro and 1967-69 Firebird models. Bracket holds fan shroud in place, connecting to the radiator support. This reproduction includes three correct 5/16"-18 J-nutsallowing for correct installation.

Four correct gauge and hole size metal plates to repair rusted, enlarged hole or thin tops of the four sub-frame to body mounting brackets. Welding required.
Will work for all 1967-74 Camaro / Firebird models and all 1968-74 Nova models.

Reproduction battery tray and clamp with screw.

Fits:
1966 Chevelle
1967-69 Camaro
1967-69 Firebird

Correct hardware to mount heater box to firewall on non AC cars with small block and big block.
Fits:
1967-81 Camaro
1967-81 Firebird

Correct reproduction replacement for all 1967-72 Camaro models with small block engines except 1969 302 and 350 engines.

Correct reproduction replacement for all 1967-72 Camaro models with small block engines except 1969 302 and 350 engines.

Replace your original rusted damaged sub-frame and radiator hardware with this quality reproduction kit. This kit contains all the bolts, washers and nuts to complete the job.

Fits:
1967-72 Camaro
1967-72 Firebird

These original style black fender to radiator support bars install from the fender to the radiator support on each side under the hood. These bars when installed, will help to keep the front sheet metal from flexing.

Fits:
1967-69 Camaro
1967-69 Firebird

Replace your heater box seals with precision die-cut neoprene seals that restore original heating and sealing efficiency. Each complete kit includes core to box seal, main duct flap door, intermediate plenum flap door, and core outlet tube seals. All seals are die cut for exact replacement. Note: Not for use on vehicles equipped with AC. Fits all small block and big block heater boxes.
Fits:
1967-81 Camaro
1967-81 Firebird
1968-72 Chevelle
1968-72 El Camino

Universal 2 piece adjustable throttle rod for small block with Rocchester 4 BBL carburetor.

Fits:
1967 Camaro
1968 Camaro
1969 Camaro

Replace your original radiator support bushings with this quality reproduction kit. This kit contains bushings only. This kit is not technically correct for 1973-81 Camaro's but will work.

Fits:
1967-81 Camaro
1967-81 Firebird

Replace your original style black fender to radiator support bars with these polished chrome bars. They install from the fender to the radiator support on each side under the hood. These bars when installed, will help to keep the front sheet metal from flexing. Comes with chrome mounting hardware.

Fits:
1967-69 Camaro
1967-69 Firebird