Correct replacement of the original gasket which is used between the sending unit and the locking ring. We recommend replacing the gasket any time the sending unit has been removed. Note: The I.D. of this gasket id 1-13/16 inch.

Fits:
1967-69 Camaro
1974-81 Camaro
1967-69 Firebird
1974-81 Firebird

Correct replacement of the original locking ring which secures the fuel tank sending unit to the gas tank. This ring helps to seal the sending unit gasket to the tank.

Fits;
1967-68 Camaro
1967-69 Firebird

Hardware to mount fuel tank filler neck and the lower retainer plate. Includes 8 correct coated screws.
Fits:
1967-68 Camaro
1967-68 Camaro

Correct replacement of the original o-ring gasket and lock ring used on all 1967-69 Camaro and Firebird models.

Note: The I.D. of this gasket id 1-13/16 inch.

Make it's easy to replace your fuel tank straps with a new fuel tank mounting hardware kit.

Fits;
1967-73 Camaro
1967-73 Firebird

Reproduction of the original 1967-68 Camaro and Friebirds fuel neck sleeve clamp used to hold the sleeve to the trunk floor.

This small fuel line rubber hose and clamps are used to connect the fuel to the fuel pump and sending unit. Includes (1) 3/8"x 6", (1) 3/8" x 13" and (4) small clamps.

Reproduction fuel tank to filler neck hose for 1967-68 Camaro and Firebird models.

.

Correct replacement for all 1969 Camaro models. This is the correct vented gas cap which installs behind the license plate door and connects to the filler neck. Unlike 1967-1968 models, the 1969 Camaro gas tank included a gas filler neck built directly into the gas tank assembly. The gas cap connects directly to this neck located behind the rear license plate.

Correct power feed wiring harness used on all 1969 Camaro models that activates the fuel tank float sending unit located in the fuel tank. We strongly recommend replacing this harness when installing a new sending unit to insurance correct reading of fuel level.

1967-68 Camaro Firebird Fuel Pump to Carburetor Gas Line for cars equipped with 327 or 350, 4 BBL. Line Diameter is 5/16 in. 1 pc.
Fits:
1967-68 Camaro
1967-68 Firebird

1967-68 Camaro Firebird Fuel Pump to Carburetor Gas Line for cars equipped with 396, 4 BBL. Line Diameter is 3/8 in. 1 pc.
Fits:
1967-68 Camaro
1967-68 Firebird

1967-69 Camaro Firebird Fuel Pump to Carburetor Gas Line for cars equipped with 327 or 350, 4 BBL. Line Diameter is 3/8 in. 1 pc.
Fits:
1967-69 Camaro
1967-69 Firebird

Reproduction fuel tank mounting straps for all 1967-69 Camaro and Firebird models.These quality straps are manufactured in heavy duty pre-formed zinc plated steel as original.

Best quality reproduction on the market. Includes precision die cut 1/2 sponge neoprene tank to floor cushion and 2 strap to tank inserts. Each sponge is inserted between the gas tank and the mounting straps. These sponges will eliminate any tank movement which may occur. Highly recommended when replacing your fuel tank or mounting straps.

Fits:
1967-68 Camaro
1967-69 Firebird

Correct reprodustion of the original rubber sleeve that covers the fuel tank neck tube inside the trunk area. Used on all 1967-68 Camaro models.

Reproduction standard fuel filler cap for 1967-68 Camaro standard models. This gas cap was standard on all 1967-68 models and comes finished in factory primary so it is ready to paint to the desired color.

1967-68 Camaro Firebird Stainless Fuel Pump to Carburetor Gas Line for cars equipped with 327 or 350, 4 BBL. Line Diameter is 5/16 in. 1 pc.
Fits:
1967-68 Camaro
1967-68 Firebird

1967-68 Camaro Firebird Stainless Fuel Pump to Carburetor Gas Line for cars equipped with 396, 4 BBL. Line Diameter is 3/8 in. 1 pc.
Fits:
1967-68 Camaro
1967-68 Firebird

1967-69 Camaro Firebird Stainless Fuel Pump to Carburetor Gas Line for cars equipped with 327 or 350, 4 BBL. Line Diameter is 3/8 in. 1 pc.
Fits:
1967-69 Camaro
1967-69 Firebird

1967-68 Camaro Firebird Fuel Line Clips. 7 pcs.

1969 Camaro Firebird Fuel Line Clips. 7 pcs.

Correct reprodustion of the steel neck unit that runs from the gas cap down to the filler neck hose unit. Gas cap fits directly to outer portion of neck. Used on all 1967-68 Camaro models.

Reproduction "SS" gas cap for 1967-68 Camaro SS models. Each cap features a chrome outer ring and chrome edged "SS" logo with correct off-white fill over a semi-flat black background as original. Also includes the correct filler neck to rear body panel attachment cable for a complete replacement.

Reproduction "RS" fgas cap for 1967-68 Camaro RS models. Each cap features a chrome outer ring and chrome "rs" bar logo over semi-flat black background as original. Also includes the correct filler neck to rear body panel attachment cable for a complete replacement

Reproduction of the rare optional 1967 "SS 350" gas cap, finished with a beautiful chrome edge. The center of the cap features the "SS 350" emblem in polished chrome against a semi-flat black background for an authentic appearance. Includes mounting ring and ring bolt as shown. Also includes the correct filler neck to rear body panel attachment cable. Note: 1968 Camaro SS models were never originally equipped with the SS 350 gas cap, however this cap will fit and function as original.

1967 Camaro and Firebird 3/8" single line fuel sending unit. Designed and manufactured to exact factory specifications, each fuel sending unit will replace the original in both fit and function. Comes complete with lock ring, gasket and plastic float.

13/8" dual line fuel sending unit. Designed and manufactured to exact factory specifications, each fuel sending unit will replace the original in both fit and function. Comes complete with lock ring, gasket and plastic float.

Fits:
1969 Camaro

1968-69 Camaro 3/8" singe line fuel sending unit. Designed and manufactured to exact factory specifications, each fuel sending unit will replace the original in both fit and function. Comes complete with lock ring, gasket and plastic float.

Applications:

• 1968 Camaro with 8-cylinder with single 3/8" line
• 1969 Camaro with DZ302 (Z/28 only) or 396ci (special high performance) 8-cylinder with single 3/8" line
• 1969 Camaro with 2bbl carburetor
• 1969 Firebird with 2bbl carburetor w/o AC with 3/8" inlet

1967-69 Camaro and Firebird 5/16" single line fuel sending unit. Designed and manufactured to exact factory specifications, each fuel sending unit will replace the original in both fit and function. Comes complete with lock ring, gasket and plastic float.