GM Convertible Top Hose Retainer - Push-in Style fits many GM models from 1955 - 72.

Fits:
1968-72 Chevelle
1967-72 Camaro
1967-72 Firebird

Stoppers are used to keep the top frame separated when folding into the well. Eliminates the problem of the top frame pieces rubbing or meeting when the top is being folded down. Sold in pairs.

Fits:
1967-69 Camaro
1967-69 Firebird

Replace your cracked or hardened header bow stops on your 1967-69 Camaro / Firebird convertible with this quality reproduction. They mount on the convertible top where the header bow meets the header molding at the top of the windshield frame. Sold in pairs.

High-quality reproduction of the convertible top switch bracket with four clips. Made to be an exact replacement for the original.
Fits:
1967-68 Camaro Convertible
1967-68 Firebird Convertible
1964-68 Chevelle Convertible

Reproduction of the original hold down cables used with all 1967-69 Camaro and Firebird convertibles. Replace your original hold down cables with these quality reproductions.

Nicely-finished reproduction of the top-latch knuckle used on convertible top latches. Comes complete with the spring and attaching roll pin. Sold in pairs. NOTE: J-Hooks not included.
Fits:
1967-69 Camaro
1967-69 Firebird
1968-72 Chevelle

Reproduction of the original latch used with manual convertible tops. Locks convertible top in place when folded in well and prevents top from raising while driving.

Fits:
1967-69 Camaro
1967-69 Firebird

Quality replacement convertible tops pads. These install in between the top frame and the convertible top and are manufactured as the original. Each pad measures 65" in length.
Fits:
1967-69 Camaro
1967-69 Firebird

Nicely-finished reproduction of the hook and knuckle used on convertible top latches. Comes complete with the spring and attaching roll pin. Sold in pairs.
Fits:
1967-69 Camaro
1967-69 Firebird
1968-72 Chevelle

Reproduction of the original style clips which attach the convertible well chrome molding around the convertible well on all 1967-69 Camaro / Firebirds. Kit includes 10 individual clips.

Exact quality reproduction of the original power top switch. Black with wide paddle arm, precise fit as original.
Fits:
1967-68 Camaro Convertible
1967-68 Firebird Convertible
1964-68 Chevelle Convertible

Reproduction of the convertible rear control link bolt and bushing set. This complete set includes all the rear control link bolts and bushings that mounts from the rear control link of the frame to the trim sticks. Set also includes the bolts used to attached the convertible top cylinders to the frame.
Fits:
1967-69 Camaro
1967-69 Firebird
1968-72 Chevelle

High quality convertible floor pan brace for 1967-69 convertible. These quality stamped steel reproductions will fit and install just like the originals. These are a must when replacing the floor pan on a convertible.

Fits:
1967-69 Camaro
1967-69 Firebird

High quality convertible floor pan brace for 1967-69 convertible.These quality stamped steel reproductions will fit and install just like the originals. These are a must when replacing the floor pan on a convertible.

Fits:
1967-69 Camaro
1967-69 Firebird

Polished stainless steel molding used on all 1967-69 Camaro / Firebird convertibles.This exact reproduction installs on the front passenger side windshield pillar post. Comes with a protective plastic coating over the molding for protection from damage during shipping. Coating should be removed once installed. Manufactured to factory specifications as original.

Polished stainless steel molding used on all 1967-69 Camaro / Firebird convertibles.This exact reproduction installs on the front passenger side windshield pillar post. Comes with a protective plastic coating over the molding for protection from damage during shipping. Coating should be removed once installed. Manufactured to factory specifications as original.

OER® reproduction steel rear convertible inner side well panel that is located directly behind the arm rest section. This panels curves around the area where the convertible top frame folds down into.

Includes the entire metal section behind the rear side arm rests. Each panel is manufactured to exact factory specifications. Now zinc plated for rust prevention.

Note: Foam backing is required between the upholstery and the panel. Upholstery and foam mate rial not included.

OER® reproduction steel rear convertible inner side well panel that is located directly behind the arm rest section. This panels curves around the area where the convertible top frame folds down into.

Includes the entire metal section behind the rear side arm rests. Each panel is manufactured to exact factory specifications. Now zinc plated for rust prevention.

Note: Foam backing is required between the upholstery and the panel. Upholstery and foam mate rial not included.

This is a quality steel reproduction of the under-floor pan brace found on all 1967-69 Camaro and Firebird convertibles. Don't trust your rusty original replace it with the is quality piece.

Quality reproduction of the x-brace under the floor pan on all 1967-69 Camaro Firebird convertibles. This brace adds structural support to the floor pan on convertibles.

Quality reproduction of the convertible top latch found on all 1967-69 Camaro and Firebirds. These are exact reproductions of the originals and come complete with hooks ready to install.

Original style replacement convertible power top hose kit. Includes 2 hoses with end connections.
Fits:
1967-69 Camaro
1967-69 Firebird

Reproduction convertible top tack strip for 1967-69 Camaro and Firebird convertible models. Mounts below rear window area. Includes three separate pieces for correct installation. This item will have to ship over size 3 due to the length of item and the box it must ship in to prevent any damage.

Replace your 1967-69 Camaro original damaged or missing molding with this excellent reproduction. The molding is manufactured in two chrome pieces. Produced from exact dimensions and to original specifications to provide a quality reproduction. Once installed, the moldings serve to hold the top boot when the convertible top is down. The top boot clips snap directly onto the well molding and help to retain the top boot. The well molding retainer clips are required to mount the molding to the car. Sold separately. Note: The convertible molding offered is for use on all 67-69 Camaro convertibles except 68 with outer door/quarter wide reveal moldings. Shipped UPS oversize.

Original style replacement convertible cylinder. Includes one cylinder.
Fits:
1967-69 Camaro
1967-69 Firebird

Reproduction of the original 1967 Camaro Convertible two piece wide chrome molding that attaches to the upper section of windshield. Does not fit exactly like original but a good alternative for a replacement part.

Reproduction of the original 1967 Camaro Convertible two piece wide satin coated chrome molding that attaches to the upper section of windshield. Does not fit exactly like original but a good alternative for a replacement part.

Reproduction convertible rain gutter for all 1967-69 Camaro and Firebird convertible models. Designed to allow rainwater to run off without getting into the rear convertible well area. Each rain gutter is injection molded in flexible ABS plastic allowing correct installation and an authentic appearance. Also includes 14 OEM style screws for easy installation. Officially licensed GM Restoration Parts product. Due to size of item it will shipped triple over size.

Quality reproduction of the 5-piece steel and rubber roof rail weatherstrip set used on 1967-69 Camaro and Firebird convertible models. This is the convertible top frame weatherstripping that seals the top to the door/side glass and header.
Fits:
1967-69 Camaro Convertible
1967-69 Firebird Convertible

Quality reproduction of the convertible top latch found on all 1967-69 Camaro and Firebirds. These are exact reproductions of the originals and come complete with hooks ready to install. Fits Camaro & Firebirds. Ships over size