Rubber bumper that fits on top of the hood adjustment screw. Includes 2 bumpers.
Fits:
1967-81 Camaro
1967-81 Firebird
1964-72 Chevelle
1964-72 El Camino

Rear rubber bumper that fits on top of the hood adjustment screw at rear od hood. Includes 2 bumpers.
Fits:
1970-81 Camaro
1970-81 Firebird

Reproduction of the outer rear hood rubber stopper. These fit over the existing jack bolt at the rear corners of the hood to make the final adjustment of your hood to get it aligned.
Fits:
1970-81 Camaro
1970-81 Firebird

Reproduction die cut gasket to replace your dry cracked heater core gasket.

Fits:
1970-81 Camaro
1870-81 Firebird

Reproduction battery tray clamp. Manufactured in steel as original. Mounting screw included.
Fits:
1967-81 Camaro
1967-69 Firebird
1964-72 Chevelle

Correct chrome wing nut for chrome lid air cleaners. Will work on any 1/4"-20 carburetor stud found on Rochester and Holley carburetors.

Firewall wire gutter with correct exterior finish and slotted mounting holes. Includes correct size, plated mounting screws.
Fits:
1970-72 Camaro
1970-72 Firebird

Correct Bumper and screw assembly to adjust front of hood height. Includes 2 bumpers and 2 screws.
Fits:
1967-81 Camaro
1967-81 Firebird
1964-72 Chevelle
1964-72 El Camino

Radiator retainer pad.
Fits:
1970-71 Camaro models with big block.
1970-81 Firebird high performance models
1968-72 Chevelle with big block
1968-72 El Camino with big block

Correct reproduction rear hood adjustment that keeps the proper clearance of the hood from windshield.

Fits:
1970-81 Camaro
1970-81 Firebird

Elbow that inserts into the RH passenger side valve cover and completes the connection to the air cleaner hose. For 1967-70 Big Block with 1"i.d. x 3 1/2" L w/90° bend.
Fits:
1967-70 Camaro
1966-70 Chevelle
1966-70 El Camino

Four correct gauge and hole size metal plates to repair rusted, enlarged hole or thin tops of the four sub-frame to body mounting brackets. Welding required.
Will work for all 1967-74 Camaro / Firebird models and all 1968-74 Nova models.

Correct reproduction rear center hood adjustment kit. Used on all equipped with hidden wipers.. Adjuster kit keeps proper clearance for wipers to retract below hood.

Fits:
1970-81 Camaro
1970-81 Firebird

Reproduction battery tray to replace your missing or decaying one.

Fits:
1970-81 Firebird

1973-81 Firebird reproduction of the original radiator overflow jug cap with white lettering and white tube. Includes a 12" hose to be cut to correct length according year of car.
1973-75 uses 11-3/4" tube
1976-79 uses a 9-3/4" tube
1980-81 uses a 10" tube

Replace your heater box seals with precision die-cut neoprene seals that restore original heating and sealing efficiency. Each complete kit includes core to box seal, main duct flap door, intermediate plenum flap door, and core outlet tube seals. All seals are die cut for exact replacement. Note: Not for use on vehicles equipped with AC. Fits all small block and big block heater boxes.
Fits:
1967-81 Camaro
1967-81 Firebird
1968-72 Chevelle
1968-72 El Camino

Replace your original rusted damaged sub-frame and radiator hardware with this quality reproduction kit. This kit contains all the bolts, washers and nuts to complete the job.

Fits:
1967-72 Camaro
1967-72 Firebird

Replace your original radiator support bushings with this quality reproduction kit. This kit contains bushings only. This kit is not technically correct for 1973-81 Camaro's but will work.

Fits:
1967-81 Camaro
1967-81 Firebird

This is an authentic reproduction of the original 1959-1972 WITTEK MFG tower-style radiator and heater hose clamps. Includes a total of eight clamps. Originally used from 1959-72, these can also be used on older models that have been converted to custom radiators with larger sized water outlets. NOTE: Some vehicles may require two additional clamps at the heater control valve.

Kit Includes:

• Two 2-1/16" upper radiator hose clamps
• Two 2-1/4" lower radiator hose clamps
• Two 5/8" heater hose clamps
• Two 3/4" heater hose clamps

Replace your original radiator support bushings and hardware with this quality reproduction kit. This kit contains all the bushings, bolts, washers and nuts to complete the job.
Fits:
1967-81 Camaro
1967-81 Firebird

Radiator Support Bushing & Hardware Kit for 1967-81 Camaro Firebird models.

Reproduction sub-frame bushing mounting kit that is design to replace your worn factory originals. Kit includes the sub-frame bushings with steel sleeves.

Fits:
1967-72 Camaro
1967-72 Firebirds

1973-81 Firebird reproduction of the original radiator overflow jug used on the following years and engine sizes: Comes with mounting hardware.
Fits:
1973-75 6 Cylinders
1977 6-cyl-231C and 305U
1978 231A, 305U, 350L
1979 231A, 305G, 350L
1980-81 231A, 267, 305

This is a quality rubber reproduction bushing mounting kit that is design to replace your worn factory originals. Kit includes the subframe and radiator support bushings with steel sleeves.

Fits:
1967-72 Camaro
1967-72 Firebirds

Reproduction heater box use on small block cars without air conditioning.
Fits:
1967-81 Camaro
1968-72 Chevelle

A complete kit of subframe mounting plates will take care of the rotted out crucial areas where the subframe bushings mount. After years of abuse, the plates may become damaged beyond repair. You certainly don't want to replace the bushings without checking the plates. These new plates will secure the subframe and add stability to the original frame. Includes the rear subframe plates, middle frame plates and the core support plates.

Fits:
1967-74 Camaro / Firebird models and all 1968-74 Nova models.

Reproduction replacement aluminum heater core installs on all 1969 Camaro Firebird small block without AC and 1970-81 Camaro and Firebird models without AC. Replaces original exactly and mounts inside heater box assembly.
Fits:
1969-81 Camaro
1969-81 Firebird

Reproduction sub-frame bushing mounting kit with grade 5 bolts and washers that is design to replace your worn factory originals. Kit includes the sub-frame bushings with steel sleeves and hardware.

Fits:
1967-72 Camaro
1967-72 Firebirds

1973-81 Firebird reproduction of the original radiator overflow jug, cap with white lettering with tube that is used on the following years and engine sizes: Comes with mounting hardware.
Fits:
1973-75 6 Cylinders
1977 6-cyl-231C and 305U
1978 231A, 305U, 350L
1979 231A, 305G, 350L
1980-81 231A, 267, 305

Reproduction replacement aluminum heater core that installs on all 1970-81 Camaro Firebird with air conditioning. Replaces original exactly and mounts inside heater box assembly.

Fits:
1970-81 Camaro
1870-81 Firebird