Correct clip used to install a reproduction 1970-78 Camaro padded dash. This is the longer of the two clips used. The original GM dash installs with 3 clips (1 long and 2 short), while OER reproduction dash pads install using 6 clips (3 long and 3 short). This long clip can be used with either a reproduction or original GM dash pads.

Applications

• 1970-78 2 required

New bulb socket for dash instrument cluster.

New bulb socket with bulb for dash instrument cluster.

Fits:
1967-81 Camaro
1967-81 Firebird
1968-72 Chevelle

Dash ash tray bumpers. Sold in pairs
Fits:
1970-84 Camaro
1968-72 Chevelle
1970-81 Firebird

Correct clip used to install the OER reproduction 1970-78 Camaro padded dash. This is the shorter of the two clips used. The original GM dash installs with 3 clips (1 long and 2 short), while OER reproduction dash pads install using 6 clips (3 long and 3 short). Also for 1979-81Camaro it can be used on either OER reproduction or original GM dash pads.

Applications

• 1970-78 2 required
• 1979-81 1 required

Replacement dash pad clip used on original GM and reproduction dash pads.

Fits:
1979 Camaro
1980 Camaro
1981 Camaro

Quality reproduction of the headlamp switch mounting nut used to retain the headlamp switch to the instrument panel.

Hardware to install instrument dash bezel. Includes 18 pieces.

Fits:
1970-71 Camaro
1970-71 Firebird

Hardware to install instrument dash bezel. Includes 18 pieces.

Fits:
1972-78 Camaro
1970-78 Firebird

Replacement dash pad clips for use with original dash pads..

Fits:
1970-78 Camaro

Correct replacement lighter housing retainer for use on all 1967-79 Camaro and Firebird models equipped with Rochester-style lighter assemblies. This housing will replace the original exactly.  GM licensed.

Correct set of 6 clips used to install an OER reproduction 1970-78 padded dash. The clips are also available separately for use with original GM padded dashes. The original GM dash installs with 3 clips (1 long and 2 short). OER reproduction dash pads install using 6 clips (3 long and 3 short) because using more clips results in a more secure and uniform fit of the dash pad. For Use With Original or Reproduction Dash Pads.

Applications

• 1970-78 2 required
• 1979-81 1 required

Replacement brackets for under dash courtesy lights. Includes (2) brackets and screws. Fits various GM models from 1967-81.

Dash pad clip set for install 1979-81 dash pads. Kit includes the 3 required clips. One kit require per car.

Fits:
1979 Camaro
1980 Camaro
1981 Camaro

Here's the exact tool you need to remove the headlamp switch nut. To apply this tool, first remove your headlamp switch knob by locating the plunger on the switch body to release the knob and pull it out. Once the knob is removed you'll see the slot at the top of the switch mounting nut. This tool fits into that slot. Line the tool up with the slot and turn the nut out. Job Done!

This is a reproduction of the headlight switch assembly. Works on 1968-69 Camaro with console guages but without RS.

Fits:
1968-81 Camaro
1968-81 Firebird
1970 Chevelle

Newly available. This is an accurate reproduction of the die-cast stamped metal block-off plate found on all factory automatic equipped 1967-81 F-body and 1968-79 X-body GM vehicles. Specifically made to block and seal the firewall clutch upper push rod opening. Reproduced in the original OEM weight, style, and appearance with a rubber cushion underneath.

Fits:
1967-81 F-Body
1968-79 X-Body

Reproduction instrument panel cigarette lighter housing retainer designed for 1971-81 Camaro models with a Rochester lighter. This authentic replication housing retainer is manufactured to exact specifications assuring proper fit and authenticity. Allows the lighter to mount to the instrument panel properly.

Fits:
1971-81 Camaro
1971-77 Chevelle
1971-81 El Camino

Correct replacement lighter housing for use on all 1970-81 Camaro and Firebird models. This is a GM license product.

Correct reproduction of the original headlamp switch knob used on all 1971-78 Camaro and 1970-71 Chevelle models.

Fits:
1970-71 Chevelle
1971-78 Camaro

Correct reproduction of the original headlamp switch knob used on all 1979-81 Camaro models.

Quality reproduction of the original lighter used with in all 1970-78 Camaro models. Includes the element and knob only. For a complete lighter assembly add parts 7028056 housing and the 7002184 retainer.  GM licensed.

AC only blower switch.
Fits:
1973-81 Camaro

Correct for all 1973-81 models and fits in the left side of the Lower Dash Panel.

Dash gauge cluster lens.
Fits:
1970-81 Camaro

OER® offers quality reproduction printed circuits for the back of the instrument cluster assembly. Meticulously manufactured to exact factory specifications, each printed circuit will replace the original non functioning circuit allowing your dash instruments to function properly.

If it's not the wiring, it's probably the printed circuit.

OER® offers quality reproduction printed circuits for the back of the instrument cluster assembly. Meticulously manufactured to exact factory specifications, each printed circuit will replace the original non functioning circuit allowing your dash instruments to function properly.

If it's not the wiring, it's probably the printed circuit.

Reproduction of the original 1970-81 Camaro and Firebird driver's side dash vent assembly. A very nice quality reproduction to replace the original air vent.