Lower standard door panel 6 piece screw kit.

Fits:
1967-69 Camaro
1967-69 Firebird

Complete kit of 12 door clips to replace missing or damage clips that fasten to the rear side of door panels.
Fits:
1967-81 Camaro
1967-81 Firebird
1964-72 Chevelle
1964-72 El Camino

Reproduction of the original door panel watershields used on all Convertible models. Its designed to help keep water or other elements from entering the inner door panel area. We recommend always replacing when installing new door panels. Includes holes for door handles and window cranks. 2- Piece kit.

Fits:
1967 Camaro
1967 Firebird

Reproduction of the original door panel watershields used on all Convertible models. Its designed to help keep water or other elements from entering the inner door panel area. We recommend always replacing when installing new door panels. Includes holes for door handles and window cranks. 2-piece kit.

Fits:
1968-69 Camaro
1968-69 Firebird

Reproduction of the original door panel watershields used on all Coupe models. Its designed to help keep water or other elements from entering the inner door panel area. We recommend always replacing when installing new door panels. Includes holes for door handles and window cranks.

Fits:
1967 Camaro
1967 Firebird

Reproduction of the original door panel watershields used on all Coupe models. Its designed to help keep water or other elements from entering the inner door panel area. We recommend always replacing when installing new door panels. Includes holes for door handles and window cranks.

Fits:
1968-69 Camaro
1968-69 Firebird

This kit Includes door plugs, door panel clips, and screws for both doors. Features:

• Correct replacement hardware
• 14 retainer clips (2 extra)
• 14 mounting plugs (2 extra)
• 8 mounting screws (4 per door)

This 85 piece interior screw kit installs all the major components in your cars interior. Door sill plates, kick panels, Door panels, Mirror, Coat hooks, Pillar post, Sunvisors, Dash bezel, Shoulder harness, Seat backs, Shifter cover, Steering column cover, A/C vents

Fits:
1969 Camaro Coupe
1969 Firebird Coupe

Picture shown for reference only.

Basic interior screw kit to install all the major components in your cars interior. Door panels, pillar post, kick panels and more. Kits are not technically correct. Total 68 pieces.
Fits:
1968 Camaro Coupe
1968 Firebird Coupe

Picture shown for reference only.

24" door jamb black windlace pair. Used on door jamb pinchweld. One is capped off.

Fits:
1968-72 Chevy II / Nova
1971-72 Pontiac Ventura models
1967-69 Camaro
1967-72 GM 2 door Sport Coupe Models

OEM-Style reproduction of the original rear upper panel molding designed to secure the quarter window panels on 1967 Camaro and Firebird models with standard interior. Molding is precision stamped to correct factory dimensions. Features correct mounting points and installs exactly as original. Sold individually - 2 required per vehicle. For use on either RH or LH sides.
Moldings attach using 4 countersunk screws (sold separately).

Fits:
1967 Camaro with standard interior
1967 Firebird with standard interior

OEM-Style reproduction of the original upper door panel molding designed to secure the top of the door panel on 1967 Camaro and Firebird models with standard interior. Molding is precision stamped in stainless steel to correct factory dimensions. Features correct mounting points and installs exactly as original. Moldings attach to the inner door structure using 5 countersunk screws (sold separately). Sold individually - 2 required per vehicle. For use on either RH or LH sides.

Fits:
1967 Camaro with standard interior
1967 Firebird with standard interior

Installs on the pinchweld of door jamb to finish out rear side panels. Includes (2) molding seals and (2) metal clips that install at the top of the moldings to secure moldings to body. One is capped off.

Fits:
1967-69 Camaro
1968-69 Firebird

Pre-sewn rear armrest covers for convertibles. Includes both LH & RH. Your choice of colors. 4-Pcs.
Fits
1967-69 Camaro
1967-69 Firebird

Replace your old damaged or missing door panels with these high quality reproduction standard door panels for 1967 Camaro and Firebird. These panels come with the trim already installed. All holes are pre-drilled for the window crank knob and arm rest bases. Sold in pairs only. Shipped Oversize.

Please specify your color choice at checkout.

If time of delivery is important please call and check availability before ordering a color other than black. Colors are made to order and can take up to 4 weeks before shipment.

Fits:
1967 Camaro Std Interior Convertible
1967 Firebird Std Interior Convertible

Pre-sewn rear armrest covers for cars with fold down rear seats. Includes both LH & RH. Color is Black.
Fits
1967-69 Camaro
1967-69 Firebird

Reproduction steel door panel top rails used for un-assembled panels or to replaced missing or damaged rails. Has thirteen 1/8" pre-drilled holes correctly spaced for panel attachment and has correct lock knob hole. Can be used for making custom door panels.
Fits:
1968-69 Camaro
1968-69 Firebird

Reproduction steel rear convertible inner side panel that is located directly behind the arm rest section. This panels curves around the area where the convertible top frame folds down into. Includes the entire metal section behind the rear side arm rests. Manufactured to exact factory specifications and is zinc plated for rust prevention. This is the driver side panel.

Reproduction steel rear convertible inner side panel that is located directly behind the arm rest section. This panels curves around the area where the convertible top frame folds down into. Includes the entire metal section behind the rear side arm rests. Manufactured to exact factory specifications and is zinc plated for rust prevention. This is the passenger side panel.

Metal rear armrest panel for coupe. Cover this part with upholstery of your cars interior color. LH side.
Fits
1967-69 Camaro
1967-69 Firebird

Metal rear armrest panel for coupe. Cover this part with upholstery of your cars interior color. RH side.
Fits
1967-69 Camaro
1967-69 Firebird

Metal rear armrest panel for convertible. Cover this part with upholstery of your cars interior color. RH side.
Fits
1967-69 Camaro
1967-69 Firebird

Metal rear armrest panel for convertible. Cover this part with upholstery of your cars interior color. LH side.
Fits
1967-69 Camaro
1967-69 Firebird

OEM-Style reproduction of the original upper door panel molding designed to secure the top of the door panel on 1967 Camaro and Firebird models with standard deluxe interior. Molding is precision stamped in stainless steel to correct factory dimensions. Features correct mounting points and installs exactly as original. Moldings attach to the inner door structure using 5 countersunk screws (sold separately). Sold individually - 2 required per vehicle. For use on either RH or LH sides.

Fits:
1967 Camaro with deluxe interior
1967 Firebird with deluxe interior

Interior door handle kit. Includes (4) black knob window cranks w/ clips, (2) std interior door handles w/ clips, (4) window crank handle springs & (4) window crank handle washers.
Fits:
1968-69 Camaro
1968-72 Chevelle
1968-69 Firebird
1968-72 Chevy II Nova

Interior door handle kit. Includes (4) black knob window cranks w/(4) clips, (2) std interior door handles w/(2) clips, (4) window crank handle springs & (4) window crank handle washers.
Fits:
1967 Camaro
1967 Firebird

Replace your old damaged or missing door panels with these high quality reproduction Deluxe door panels for 1967 Camaro and Firebird. All holes for the window crank knob and armrest bases are located on back of panels. Sold in pairs only.

Please specify your color choice at checkout.

If time of delivery is important please call and check availability before ordering a color other than black. Colors are made to order and can take up to 4 weeks before shipment.

Fits:
1967 Camaro Deluxe Coupe
1967 Firebird Deluxe Coupe

Replace your old damaged or missing door panels with these high quality reproduction Deluxe door panels for 1967 Camaro and Firebird. All holes for the window crank knob and armrest bases are located on back of panels. Sold in pairs only.

Please specify your color choice at checkout.

If time of delivery is important please call and check availability before ordering a color other than black. Colors are made to order and can take up to 4 weeks before shipment.

Fits:
1967 Camaro Deluxe Convertible
1967 Firebird Deluxe Convertible

OEM-Style reproductions of the original upper door panel molding designed to secure the top of the door panel on 1967 Camaro and Firebird models with standard interior. Molding is precision stamped in stainless steel to correct factory dimensions. Features correct mounting points and installs exactly as original. Moldings attach to the inner door structure using 10 countersunk screws (sold separately).

Fits:
1967 Camaro with standard interior
1967 Firebird with standard interior

Reproduction of the door jamb windlace used on all 1967 Camaro and Firebird coupe and convertible models. Includes end caps. Sold in pairs only