Dimmer Switch Grommet
Fits:
1967-81 Camaro/Firebird
1968-72 Chevelle

Black wire and battery cable straps used to hold battery cables together. Also used to hold the speedometer cable to the front parking brake cable on all Gm A-bodies. Includes 2 straps
Fits:
1964-72 GM Chevelle

This factory correct screw kit is intended to secure the circuit board next to the 5 bulb sockets on your circuit board and the Tach to the metal gauge housing. The (5) screws come with wafer washers and the Tach has (2) nuts and flat washers.

Fits:

Reproduction of the original battery junction block. This items is used to provide a junction point for your battery to your wiring harness by isolating it from the body.
Fits:
1967-69 Camaro
1967-69 Firebird
1968-69 Chevelle

The headlight dimmer switch is located on the drivers front floor and used to switch the headlights from low beam to high beam. Dimmer switch on 79-81 Firebirds are on the steering column.
Fits:
1967-81 Camaro
1967-78 Firebird
1964-72 Chevelle

Replacement door jamb switch with double terminal. This switch is a GM service replacement part, which may differ slightly from the original in appearance but are completely functional.
Fits:
1967-81 Camaro
1967-81 Firebird
1969-73 Chevelle

This is a faithful reproduction of the Bezel nut for the Ignition Cylinder.
Fits: 1968 Chevelle

Reproduction ignition key switch with Square head GM keys.

Fits:
1966 Chevelle
1967 Chevelle

Quality-made by American Auto Wire. OEM-style reproduction neutral safety and back-up light switch for column-mounted shifters.

Fits:
1969-73 Camaro
1969-73 Firebird
1969-73 Chevelle
.

Fits on left side of the transmission pan for 1968-72 GM cars with Turbomatic 350 and 400. Fits a variety of models such as:
1968-72 Camaro/Firebird
1968-72 Chevelle
1968-72 Nova

This is a reproduction of the standard Camaro Chevelle headlight switch assembly. It also applies to the '67 Camaro RS. This is a 8 Pin switch.
Note: NOT for use with '68 Camaro RS models, or 1970 Chevelle models.
Fits:
1968-69 & 1971-72 Chevelle models only
1967 Camaro base, and RS models only
1968-69 Camaro models, except RS only

This is a reproduction of the headlight switch assembly. Works on 1968-69 Camaro with console gauges but without RS. This is a 7 pin terminal switch.
Fits:
1968-81 Camaro
1968-81 Firebird
1970 Chevelle
1974-79 Nova

This is the correct replacement for the neutral safety switch located at base of steering column for 1964-66 Chevelle models with Powerglide transmissions. This harness has correct factory colors and wires are gauged to match the original size. This harness is wrapped in the correct non-adhesive tape and feature factory-correct connectors.
Fits:
1964-66 Chevelle
1962-66 Chevy II/Nova

Reproduction replacement  switch for all  1968 Camaro, Chevelle, and Firebird models. This switch for 1968 is dash-mounted.

Correct heater blower motor resistor w/o AC
Fits:
1967-83 Camaro
1967-83 Firebird
1964-72 Chevelle
1962-68 Nova

Ignition switch for all without tilt.
Fits:
1969-81 Camaro
1970-81 Firebird
1968-73 Chevelle
1969-73 El Camino

Ignition switch for all with tilt.
Fits:
1969-81 Camaro
1970-81 Firebird
1969-73 Chevelle
1969-73 El Camino

Quality reproduction neutral safety and back-up light switch for all floor mounted automatic console shift models. Replaces GM 1993434 & Delco D-2206
Fits:
1968-69 Camaro
1968-72 Chevelles
1968-72 El Caminos,
1970-72 Monte Carlo
1971-72 Pontaic Ventura.
1969-70 Nova

Authentic reproduction of the Instrument Cluster Ground Strap.
Fits:
1970-72 Chevelle

Blower Motor Resistor w/o Factory AC.

Fits :
1967-81 Camaro
1964-72 Chevelle
1962-72 Chevy II Nova
1970-72 Ventura II

Reproduction horn relay.

Fits:
1967-71 Camaro
1968-69 Firebird
1966-71 Malibu
1967-71 Nova

Turn signal switch. Made in the USA by American Autowire
Fits:
1967-76 Camaro
1967-76 Firebird
1969-72 Chevelle
1969-72 El Camino

Muncie 4-speed mounting bracket kit to install backup light switch on transmission.

This is a correct extension harness for 1968 Chevelles with Automatic Transmission. It fits exactly like the original.
Fits:
1968 Chevelle with Automatic Transmission

This is a correct extension harness for 1969-72 Chevelles with Automatic Transmission. It fits exactly like the original.
Fits:
1969-72 Chevelle with Automatic Transmission

Quality reproduction neutral safety and back-up light switch for all 4 speed manual transmission cars. Mounts to the bottom of the steering column.
Fits:
1968-81 Camaro
1968-81 Firebird
1968-77 Chevelle
1968-77 El Camino

Turn signal switch with plastic base for 1965-66 Chevelle without tilt steering column. NOTE: GM used two different switches in the 1965-66 GM A-bodies with non-tilt steering columns.This one has the plastic base. 00387115 is the correct product # for the metal base. Please verify which one you have as they are not interchangeable.
Made in the USA by American Autowire
Fits:
1965-66 Chevelle

Quality reproduction printed circuit for the back of the instrument cluster assembly. Meticulously manufactured to exact factory specifications, this printed circuit will replace the original, allowing your dash instruments to function properly.

If it's not the wiring, it's probably the printed circuit.