Reproduction door handle / window crank handle C-clip retainer. Designed to hold the door handle / window crank handle onto the door mechanism or window regulator shaft. Sold in pairs only.
Fits:
1967-1992 Camaro
1967-1992 Firebird
1964-72 Chevelle
1962-79 Nova

Screws used to install arm rest pads to the armrest bases.
Fits:
1967-69 Camaro
1967-69 Firebird
1968-72 Chevelle
1968-72 El Camino

These springs mount between the window regulator and door panel and keeps tension on the panel where the crank mounts. We recommended replacement whenever changing window cranks or replacing your door panels. Sold in pairs only.
Fits:
1967-81 Camaro
1967-81 Firebird
1964-72 Chevelle
1962-72 Nova

These plastic washers mount between the window crank handle and door panel. It keeps window crank from cutting into your door panel. We recommended replacement whenever changing window cranks or replacing your door panels. Sold in pairs only.

Fits:
1967-81 Camaro
1967-81 Firebird
1964-72 Chevelle

Correct reproduction of the original door lock knobs for 1968 Camaro/Chevelle/Firebird models. Sold as a pair.

Reproduction of the original chrome door lock knobs. Sold in a pair.
Fits:
1969-70 Camaro
1969-70 Firebird
1968-69 Chevelle

Reproduction of the original door chrome lock knobs. Sold in a pair.
Fits:
1971-81 Camaro
1971-81 Firebird
1970-72 Chevelle

All the screws required to replace both RH and LH standard arm rest bases. Kit includes 6 pieces.
Fits:
1968-69 Camaro
1968-69 Camaro
1968-72 Chevelle
1968-72 Nova

These are the screws that secures the door vent window to the door frame. This screw is installs in the top of the door frame below the vent window on the inside of the door. There is a recessed hole for this screw. Includes 2 screws.
Fits:
1964-67 Chevelle

Correct reproduction of the original door lock knobs for 1962-66 GM models. Sold in a pair.
Fits:
1964-67 Chevelle
1962-66 Nova

Reproduction window crank handle used on all 1967-81 GM models. Die cast and chrome plated and with black knob as original. Fits both LH or RH application and includes C-clip for easy installation.
Fits:
1967-81 Camaro
1967-81 Firebird
1968-72 Chevelle
1968-74 Nova

Complete kit of 12 door clips to replace missing or damage clips that fasten to the rear side of door panels.
Fits:
1967-81 Camaro
1967-81 Firebird
1964-72 Chevelle
1964-72 El Camino

Reproduction window crank handle used on all 1967-81 Camaro and Firebird models, and 1968-72 Chevelle models. Die cast and chrome plated and with clear knob as original. Fits both LH or RH application and includes C-clip for easy installation.
Fits:
1967-81 Camaro/Firebird
1968-72 Chevelle

Sold individually. This quality window crank is for the discerning restoration enthusiast. Unlike less expensive window cranks, all attention is given to the details to provide a long-lasting replica of the original. A gnarled grip on the crank handle, and factory correct clip, mounts the handle securely. The knob is firmly riveted to the handle just like the factory original. Handle has been re-created to match the original 1967 including design pattern and dimensions.
Fits:
1967 Chevelle all models
1967 Chevy II Nova

Complete kit of 12 door plugs to replace missing or damage plugs in door shell.
Fits:
1967-81 Camaro
1967-81 Firebird
1964-72 Chevelle

Reproduction of the original door lock ferrules which features the correct narrow ring and felt lining. Sold as a pair.

Fits:
1968-69 Camaro
1968-72 Chevelle
1968-69 Firebird

Sold individually, with washer included. This quality window crank is for the discerning restoration enthusiast. Unlike less expensive window cranks, all attention is given to the details to provide a long-lasting replica of the original. A gnarled grip on the crank handle, and factory correct clip, mounts the handle securely. The knob is firmly riveted to the handle just like the factory original. Handle has been re-created to match the original 1967 including design pattern and dimensions.
Fits:
1967 Chevelle all models
1967 Chevy II Nova

Sold individually. This quality window crank is for the discerning restoration enthusiast. Unlike less expensive window cranks, all attention is given to the details to provide a long-lasting replica of the original. A gnarled grip on the crank handle, and factory correct clip, mounts the handle securely. The knob is firmly riveted to the handle just like the factory original. Handle has been re-created to match the original 1965-66 Chevelle including design pattern and dimensions.
Fits:
1965 Chevelle
1966 Chevelle

Quality reproduction door handle designed to replace your pitted or worn out original with standard interiors. Fits both LH or RH application and includes C-clip for easy installation.
Fits:
1967 Camaro
1967 Firebird
1965-67 Chevelle
1965-67 El Camaino
1965-67 Chevy II Nova

Reproduction vent window crank handles used on all 1968 Chevelle models. Die cast and chrome plated and with black knob as original. Includes C-clip for easy installation.
Fits:
1968 Chevelle

Reproduction vent window crank handles used on all 1968 Chevelle models. Die cast and chrome plated and with clear knob as original. Includes C-clip for easy installation.
Fits:
1968 Chevelle

Sold individually. This quality vent window crank is for the discerning restoration enthusiast. Unlike less expensive window cranks, all attention is given to the details to provide a long-lasting replica of the original. A gnarled grip on the crank handle, and factory correct clip, mounts the handle securely. The knob is firmly riveted to the handle just like the factory original. Handle has been re-created to match the original 1968 Chevelle including design pattern and dimensions.

Sold individually. This quality vent window crank is for the discerning restoration enthusiast. Unlike less expensive window cranks, all attention is given to the details to provide a long-lasting replica of the original. A gnarled grip on the crank handle, and factory correct clip, mounts the handle securely. The knob is firmly riveted to the handle just like the factory original. Handle has been re-created to match the original 1968 Chevelle including design pattern and dimensions.

Sold individually, with washer included. This quality window crank is for the discerning restoration enthusiast. Unlike less expensive window cranks, all attention is given to the details to provide a long-lasting replica of the original. A gnarled grip on the crank handle, and factory correct clip, mounts the handle securely. The knob is firmly riveted to the handle just like the factory original. Handle has been re-created to match the original 1965-66 Chevelle including design pattern and dimensions.

Fits:
1965-66 Chevelle all models

Sold individually, and includes new washer. This quality vent window crank is for the discerning restoration enthusiast. Unlike less expensive window cranks, all attention is given to the details to provide a long-lasting replica of the original. A gnarled grip on the crank handle, and factory correct clip, mounts the handle securely. The knob is firmly riveted to the handle just like the factory original. Handle has been re-created to match the original 1968 Chevelle including design pattern and dimensions.

Sold individually, and includes new washer. This quality vent window crank is for the discerning restoration enthusiast. Unlike less expensive window cranks, all attention is given to the details to provide a long-lasting replica of the original. A gnarled grip on the crank handle, and factory correct clip, mounts the handle securely. The knob is firmly riveted to the handle just like the factory original. Handle has been re-created to match the original 1968 Chevelle including design pattern and dimensions.

Reproduction of the standard inner door handle. Each door handle is die cast then chrome plated and features correct engraved details for an authentic appearance. LH side.
Fits:
1968-69 Camaro
1968-69 Firebird
1968-72 Chevelle

Reproduction of the standard inner door handle. Each door handle is die cast then chrome plated and features correct engraved details for an authentic appearance. RH side.
Fits:
1968-69 Camaro
1968-69 Firebird
1968-72 Chevelle

Sold as a pair. These quality window cranks are for the discerning restoration enthusiast. Unlike less expensive window cranks, all attention is given to the details to provide a long-lasting replica of the original. A gnarled grip on the crank handle, and factory correct clip, mounts the handle securely. The knob is firmly riveted to the handle just like the factory original. Handle has been re-created to match the original 1967 including design pattern and dimensions.
Fits:
1967 Chevelle all models
1967 Chevy II Nova

When installing new door panels on your Camaro we recommend install new door panel clips and door plugs. Includes 12 door plugs and 12 door panel clips.
Fits:
1967-81 Camaro
1967-81 Firebird
1964-72 Chevelle
1964-72 El Camino