Reproduction brake and clutch pin clip used on 1967-69 Camaro Firebird and 1968-72 Chevelle.

Fits:
1967-69 Camaro Firebird
1968-72 Chevelle

Park brake cable clip.

Fits:
1968-72 Chevelle
1967-69 Camaro
1967-69 Firebird

This brake line clip is used on all GM Cars in the 50's,60's, 70's & 80's to hold the flexible brake hose into the frame bracket. Includes (1) brake clip. Color is black
Fits:
1967-81 Camaro
1967-81 Firebird
1968-72 Chevelle
1968-72 El Camino

Reproduction of the park brake connectors. Sold in pairs

Fits:
1968-72 Chevelle
1967-69 Camaro
1967-69 Firebird

Park brake cable clip. 3-piece kit.

Fits:
1968-72 Chevelle
1967-69 Camaro
1967-69 Firebird

These clips are used on all GM Cars in the 50's,60's, 70's & 80's to hold the flexible brake hose into the frame bracket. There are usually 2 at each front wheel and one for the rear drop hose. Includes 4 brake clips. Color is black
Fits:
1967-81 Camaro
1967-81 Firebird
1968-72 Chevelle
1968-72 El Camino

Reproduction the GM park brake handle.

Fits:
1967-69 Camaro
1964-72 Chevelle
1967-69 Firebird

Reproduction of the park brake equalizer.

Fits:
1964-69 Chevelle
1967-69 Camaro
1967-69 Firebird

Translucent plastic brake warning lens has been authentically reproduced for the 1970-72 Chevelle Super Sport dash panel. The lens, used to indicate low brake fluid and pressure, features correct red coloring and is screen printed with original style white lettering for an original appearance.

Fits: 1970-72 Chevelle SS

Nice Reproduction of the 70-72 Chevelle Park Brake Release Handle.

Accurate reproduction of the brake & clutch pedal pin for 1967-81 Camaro Firebird and 1968-72 Chevelle models. Made from quality heat treated steel and plated.

These rear axle brake lines include a pair of lines that run across the rear axle housing and connect the wheel cylinders or calipers to the flex hose in the middle of the rear end.
NOTE: Lines are manufactured to work with the original housings that use factory brakes. Any after-market modifications such as disc brakes or narrowed rear ends will likely not fit these lines. If your braking system is not 100% stock, please call 706-884-9100 for assistance in selection of lines that will fit properly.

Fits: 1968-72 Chevelle

This pair of rear axle brake lines are exact replacements for the originals and run across the rear axle housing. They connect the wheel cylinders or calipers to the flex hose in the middle of the rear end.

NOTE: These line kits are for vehicles with FACTORY BRAKE SYSTEMS. If you have a disc conversion or after market valve, please call (706) 884-9100 for assistance determining the correct brake line set.
Fits:
1975-81 Firebird with standard rear end

This pair of rear axle brake lines are exact replacements for the originals and run across the rear axle housing. They connect the wheel cylinders or calipers to the flex hose in the middle of the rear end.

NOTE: These line kits are for vehicles with FACTORY BRAKE SYSTEMS. If you have a disc conversion or after market valve, please call (706) 884-9100 for assistance determining the correct brake line set.
Fits:
1975-81 Firebird with rear disc

Kit includes: Horn cap mounting and horn contact assembly with hardware (1" inner diameter), canceling cam, pin, spring and retainer, quality high strength wheel mounting screw set.

Fits:
1969 Chevelle with Wooden Steering Wheel & Tilt
1969 Camaro with Wooden Steering Wheel & Tilt

These stainless rear axle brake lines include a pair of lines that run across the rear axle housing and connect the wheel cylinders or calipers to the flex hose in the middle of the rear end.
NOTE: Lines are manufactured to work with the original housings that use factory brakes. Any after-market modifications such as disc brakes or narrowed rear ends will likely not fit these lines. If your braking system is not 100% stock, please call 706-884-9100 for assistance in selection of lines that will fit properly.

Fits: 1968-72 Chevelle

This pair of stainless rear axle brake lines are exact replacements for the originals and run across the rear axle housing. They connect the wheel cylinders or calipers to the flex hose in the middle of the rear end.

NOTE: These line kits are for vehicles with FACTORY BRAKE SYSTEMS. If you have a disc conversion or after market valve, please call (706) 884-9100 for assistance determining the correct brake line set.
Fits:
1975-81 Firebird with standard rear end

This pair of stainless rear axle brake lines are exact replacements for the originals and run across the rear axle housing. They connect the wheel cylinders or calipers to the flex hose in the middle of the rear end.

NOTE: These line kits are for vehicles with FACTORY BRAKE SYSTEMS. If you have a disc conversion or after market valve, please call (706) 884-9100 for assistance determining the correct brake line set.
Fits:
1975-81 Firebird with rear disc

This 3 piece front brake line kit consists of all brake lines under the hood, and the master cylinder to the distribution, combination, or metering valve. The left and right front lines that run to the front flex hoses are also included. NOTE: These kits are intended for vehicles with factory brake systems. If you have a braking system less than 100% stock, please call (706) 884-9100 for assistance in determining the correct line set.

Fits:
1966 Malibu with std front drum

Front disc brake backing plates for single piston calipers. Sold in Pairs

Fits:
1967-68 Camaro
1967-69 Firebird
1968-72 Chevelle
1968-72 E Camino

This 3 piece front brake line kit consists of all brake lines under the hood, and the master cylinder to the distribution, combination, or metering valve. The left and right front lines that run to the front flex hoses are also included. NOTE: These kits are intended for vehicles with factory brake systems. If you have a braking system less than 100% stock, please call (706) 884-9100 for assistance in determining the correct line set.

Fits:
1966 Malibu SS & Z-16 with std front drum

This quality made, replacement front to rear brake line, extends from the distribution, combination or metering valve along the length of the vehicle to the rear flex hose. It is manufactured in strict accordance with original factory specifications.

Fits:
1968 Chevelle Hardtop

This quality made, replacement front to rear brake line, extends from the distribution, combination or metering valve along the length of the vehicle to the rear flex hose. It is manufactured in strict accordance with original factory specifications.

Fits:
1968 Chevelle Convertible

This quality made, replacement front to rear brake line, extends from the distribution, combination or metering valve along the length of the vehicle to the rear flex hose. It is manufactured in strict accordance with original factory specifications.

Fits:
1969 Chevelle Hardtop

This quality made, replacement front to rear brake line, extends from the distribution, combination or metering valve along the length of the vehicle to the rear flex hose. It is manufactured in strict accordance with original factory specifications.

Fits:
1969 Chevelle Convertible

These quality made, 2-piece,replacement front to rear brake lines, extend from the distribution, combination or metering valve along the length of the vehicle to the rear flex hose. They are manufactured in strict accordance with original factory specifications.

Fits:
1970 Chevelle Hardtop with DISC ONLY

These quality made, 2-piece,replacement front to rear brake lines, extend from the distribution, combination or metering valve along the length of the vehicle to the rear flex hose. They are manufactured in strict accordance with original factory specifications.

Fits:
1970 Chevelle Convertible with DISC ONLY

This quality made, replacement front to rear brake line, extends from the distribution, combination or metering valve along the length of the vehicle to the rear flex hose. It is manufactured in strict accordance with original factory specifications. NOTE: NOT intended for use with 70-72 Chevelle 4-door Models.

Fits:
1970-72 Chevelle Hardtop Drum, EXCEPT 4-DOOR

This quality made, replacement front to rear brake line, extends from the distribution, combination or metering valve along the length of the vehicle to the rear flex hose. It is manufactured in strict accordance with original factory specifications.

Fits:
1970-72 Chevelle Convertible Drum

This quality made, replacement front to rear brake line, extends from the distribution, combination or metering valve along the length of the vehicle to the rear flex hose. It is manufactured in strict accordance with original factory specifications.

Fits:
1970-72 Chevelle Wagon Power Disc