1968-81 Automatic Shifter Cable Clips
Clips used to attach the cable at the shifter and at the transmission bracket. Sold in 2 pack.
Fits:
1968-81 Camaro
1968-81 Firebird
1968-72 Chevelle
1968-72 El Camino
1964-67 Chevelle Shift Slider Plate for Auto Trans
This is the black plastic piece that goes around the shifter-slot and slides up and down when you shift gears. A very often worn, damaged or missing part. Made of flexible plastic.
Fits:
1964-67 Chevelle w/AT
1968-78 Camaro Shifter Cable Pin Stud Kit
Hardened pin stud, lock washer, nut and shifter cable retaining clip. Used on TH-350 and TH-400 with cable shift.
Fits
1968-78 Camaro
1968-78 Corvette
1967-78 Firebird
1968-77 Chevelle
1969-74 Grand Prix
1968-69 Fullsize Chevrolet
1964-68 Chevelle Backup Switch Bracket for Muncie 4-Speed
This reproduction switch bracket is identical to original equipment for all 1964-68 Muncie 4-speed models. Each bracket is stamped in heavy-duty steel and features all of the correct mounting holes for ease of installation.
Fits:
1964-68 Chevelle
1964-67 Chevelle Shift Boot
Originally installed on all Chevelle models equiuped with 4-speed Manual Transmission. This is a quality reproduction. For use with console or without console applications.
Fits:
1964-67 Chevelle
1964-66 Chevelle Column Shift Auto Trans Neutral Safety Switch
This is the correct replacement for the neutral safety switch located at base of steering column for 1964-66 Chevelle models with Powerglide transmissions. This harness has correct factory colors and wires are gauged to match the original size. This harness is wrapped in the correct non-adhesive tape and feature factory-correct connectors.
Fits:
1964-66 Chevelle
1962-66 Chevy II/Nova
1968-72 Floor Shifter Neutral Safety & Backup Switch
Quality reproduction neutral safety and back-up light switch for all floor mounted automatic console shift models. Replaces GM 1993434 & Delco D-2206
Fits:
1968-69 Camaro
1968-72 Chevelles
1968-72 El Caminos,
1970-72 Monte Carlo
1971-72 Pontaic Ventura.
1969-70 Nova
1969-81 GM Backup / Neutral Safety Switch 4-Speed
Quality reproduction neutral safety and back-up light switch for all 4 speed manual transmission cars. Mounts to the bottom of the steering column.
Fits:
1968-81 Camaro
1968-81 Firebird
1968-77 Chevelle
1968-77 El Camino
Stainless 30" Shift Cable to Replace GM3956765
The Shiftworks Stainless Steel cable has great flexibility with a bend radius of 2 inches, a load rating of 80 lbs. of push and 120 lbs. of pull, adjustable bulkhead connectors, stainless cable, non-booted modern dry sweep design, and is easier to install as a result. Cable allows 2.5" of travel.
Features:
- 30" eyelet to eyelet
- 0.25" eyelets at each end
- Total Travel = 2.5"
- Adjustable connections at bulkhead
- Bulkhead to Bulkhead = 17.25" - 18.0"
32" Stainless Shift Cable for 4L80E Applications
The Shiftworks Stainless Steel cable has great flexibility with a bend radius of 2 inches, a load rating of 80 lbs. of push and 120 lbs. of pull, adjustable bulkhead connectors, stainless cable, non-booted modern dry sweep design, and is easier to install as a result. Cable allows 2.5" of travel.
Features:
- 32" eyelet to eyelet
- 0.25" eyelets at each end
- Total Travel = 2.5"
- Adjustable connections at bulkhead
- Bulkhead to Bulkhead = 19.25" - 20.0"
1971-72 Chevelle AT Floor Shift 4-Speed Overdrive Conversion Kit
Converts the original factory automatic floor shifter to work with a more modern transmission.
Kit Includes:
- Transmission Pan Bracket
- Transmission Shift Lever
- New Shifter Detent (to determine gear positions on shifter)
- New Console Grear Indicator
- Hardware Kit
- Printed Instructions
NOTE: Adjustable Shift Cable Replacement Sold Separately
Fits:
1971-72 Chevelle with Automatic Transmission
1979-81 Camaro, 73-77 Chevelle AT Floor Shift 4-Speed w/Overdrive Conversion Kit
This kit converts your factory AT Floor Shifter to work with a more modern transmission (i.e. 4-speed with overdrive).
Kit includes:
- Written instructions
- Transmission cable bracket
- Transmission shift lever
- New shifter detent
- New console gear indicator adaptor
- Hardware kit
Fits:
1979-81 Camaro
1968-81 Firebird
1973-77 Chevelle/Malibu
1968-75 GTO
1968-72 Chevelle Automatic 4-Speed Shifter w/Overdrive Assembled
Fully assembled and converted automatic shifter for a 4-speed automatic transmission with overdrive. Comes with neutral switch installed. Can be used with all modern 4-speed automatic transmissions. The shifter cable, transmission gear selector, cable bracket & hardware sold separately. Complete kits are availably with these items included ready to install. See part numbers: SCP1013, SCP1014, SCP1023 & SCP1024.
Fits
1968-72 Chevelle
1968-70 Chevelle Automatic Shifter Kit for 200R4, 700R4, 4L60, 4L60E, 4L65E, 4L70E, 4L75E Overdrive Transmission
New automatic overdrive shifter for 1968-70 Chevelle with a 200R4, 700R4, 4L60, 4L60E, 4L65E & 4L70E, 4L75E. This is a direct bolt in fully assembled shifter including all transmission brackets and cable. Fits in console and looks like original. Comes with neutral safety switch installed and overdrive shift lens indicator.
1) New upgraded reproduction
shifter
2) Transmission pan bracket
3) Transmission shift lever
4) Adjustable 30" shifter
cable
5) New shifter detent
(determines gear positions)
6) New console gear indicator
7) All necessary hardware
1971-72 Chevelle Automatic Shifter Kit for 200R4, 700R4, 4L60, 4L60E, 4L65E, 4L70E, 4L75E Overdrive Transmission
New automatic overdrive shifter for 1971-72 Chevelle with a 2004 700R4, 4L60, 4L60E, 4L65E & 4L70E, 4L75E. This is a direct bolt in fully assembled shifter including all transmission brackets and cable. Fits in console and looks like original. Comes with neutral safety switch installed and overdrive shift lens indicator.
1) New upgraded reproduction
shifter
2) Transmission pan bracket
3) Transmission shift lever
4) Adjustable 30" shifter
cable
5) New shifter detent
(determines gear positions)
6) New console gear indicator
7) All necessary hardware