Quality EDPM Rubber reproduction of the original GM Floor Pan Drain Plugs found at various locations. 2" diameter round plug is approximately 0.4 inches thick.

Reproduction of the original floor pan plug for use with floor pans and truck pans. Fits:
1967-81 Camaro
1967-81 Firebird
1968-72 Chevelle
1962-72 Nova

Reproduction rear rocker panel flap. Prevents road splash and debris from entering and blocking the rocker panel drain area. This flap mounts on the rear side of the inner rocker panel. Sold as a pair.
Fits:
1967-72 Camaro
1967-72 Firebird
1964-72 Chevelle

The headlight dimmer switch is located on the drivers front floor and used to switch the headlights from low beam to high beam. Dimmer switch on 79-81 Firebirds are on the steering column.
Fits:
1967-81 Camaro
1967-78 Firebird
1964-72 Chevelle

This 1-piece, OEM-style replacement, stamped-steel bracket, secures the back of the rear seat to the floor pan on one side. NOTE: This is one piece of a 4-piece set that secures the entire back seat.
Fits:
1964-72 Chevelle
1964-72 Pontiac
1964-72 Buick
1964-72 Olds

This 1-piece, OEM-style replacement, stamped-steel bracket, secures the bottom of the rear seat to the floor pan on one side. NOTE: This is one piece of a 4-piece set that secures the entire back seat.
Fits:
1964-72 Chevelle
1964-72 Pontiac
1964-72 Buick
1964-72 Olds

Reproduction of the original floor pan plug for use with floor pans and truck pans.

Fits:
1968-72 Chevelle

These four, OEM-style replacement, stamped-steel brackets, secure the rear seat to the floor pan.
Fits:
1964-72 Chevelle
1964-72 Pontiac
1964-72 Buick
1964-72 Olds

Replace the LH damaged or rusted out front section of your 1968-72 Chevelle's floor pan with these quality reproductions. Each partial floor pan is manufactured to replace the original exactly and is produced in the same configuration as the original. The front partial floor pans will cover the area from the firewall extension to the area just behind the front seats. Shipped double oversize.

Fits:
1968-72 Chevelle

Replace the RH damaged or rusted out front section of your 1968-72 Chevelle's floor pan with these quality reproductions. Each partial floor pan is manufactured to replace the original exactly and is produced in the same configuration as the original. The front partial floor pans will cover the area from the firewall extension to the area just behind the front seats. Shipped double oversize.

Fits:
1968-72 Chevelle

Replace the LH damaged or rusted out rear section of your 1968-72 Chevelle's floor pan with these quality reproductions. Each partial floor pan is manufactured to replace the original exactly and is produced in the same configuration as the original. Shipped double oversize.

Fits:
1968-72 Chevelle

Replace the RH damaged or rusted out rear section of your 1968-72 Chevelle's floor pan with these quality reproductions. Each partial floor pan is manufactured to replace the original exactly and is produced in the same configuration as the original. Shipped double oversize.

Fits:
1968-72 Chevelle

Replace the LH damaged or rusted out front section of your 1964-67 Chevelle's floor pan with these quality reproductions. Each partial floor pan is manufactured to replace the original exactly and is produced in the same configuration as the original. The front partial floor pans will cover the area from the firewall extension to the area just behind the front seats. Shipped double oversize.

Fits:
1964-67 Chevelle

Replace the RH damaged or rusted out front section of your 1964-67 Chevelle's floor pan with these quality reproductions. Each partial floor pan is manufactured to replace the original exactly and is produced in the same configuration as the original. The front partial floor pans will cover the area from the firewall extension to the area just behind the front seats. Shipped double oversize.

Fits:
1964-67 Chevelle

Replace the LH damaged or rusted out rear section of your 1964-67 Chevelle's floor pan with these quality reproductions. Each partial floor pan is manufactured to replace the original exactly and is produced in the same configuration as the original. Shipped double oversize.

Fits:
1964-67 Chevelle

Replace the RH damaged or rusted out rear section of your 1964-67 Chevelle's floor pan with these quality reproductions. Each partial floor pan is manufactured to replace the original exactly and is produced in the same configuration as the original. Shipped double oversize.

Fits:
1964-67 Chevelle

Replace the LH damaged or rusted out rear section of your 1964-67 Chevelle's floor pan with these quality reproductions. Each partial floor pan is manufactured to replace the original exactly and is produced in the same configuration as the original. Shipped double oversize.

Fits:
1964-67 Chevelle

Replace the RH damaged or rusted out rear section of your 1964-67 Chevelle's floor pan with these quality reproductions. Each partial floor pan is manufactured to replace the original exactly and is produced in the same configuration as the original. Shipped double oversize.

Fits:
1964-67 Chevelle

Welds to the Floor Pan for Reinforcement on Chevelle 4-Speed Models with Center Console.

Fits:
1968-72 Chevelle 4-Speed transmissions with center console

Welds to the Floor Pan for Reinforcement on Chevelle 4-Speed Models without center console.

Fits:
1968-72 Chevelle 4-Speed transmissions without center console

Replace the RH damaged or rusted out rear section of your 1968-72 Chevelle's floor pan with these quality reproductions. Each partial floor pan is manufactured to replace the original exactly and is produced in the same configuration as the original. Shipped double oversize.

Fits:
1968-72 Chevelle

Replace the LH damaged or rusted out rear section of your 1968-72 Chevelle's floor pan with these quality reproductions. Each partial floor pan is manufactured to replace the original exactly and is produced in the same configuration as the original. Shipped double oversize.

Fits:
1968-72 Chevelle

Quality reproduction of the OEM Front Floor Pan Brace. 1-Pc
Fits:
1964-69 Chevelle

Quality reproduction of the OEM Center Floor Pan Brace. 1-Pc
Fits:
1964-69 Chevelle

Quality reproduction of the OEM Front Floor Pan Brace. 1-Pc
Fits:
1970-72 Chevelle

Quality reproduction of the OEM Center Floor Pan Brace. 1-Pc
Fits:
1970-72 Chevelle

This quality reproduction is a full length LH floor pan with lower firewall section and half of the center hump. Shipped truck freight.

Fits:
1968-72 Chevelle

This quality reproduction is a full length RH floor pan with lower firewall section and half of the center hump. Shipped truck freight.

Fits:
1968-72 Chevelle

This quality reproduction is a full length LH floor pan with lower firewall section and half of the center hump. Shipped truck freight.

Fits:
1964-67 Chevelle

This quality reproduction is a full length RH floor pan with lower firewall section and half of the center hump. Shipped truck freight.

Fits:
1964-67 Chevelle