Reproduction horn button cap retainer for 1971-81 Camaro and 1971-72 Chevelle models equipped with optional NK4 4-spoke sport steering wheel. This retainer is used to mount the horn cap to the steering wheel.

Fits:
1971-81 Camaro
1971-72 Chevelle

This quality reproduction of the Emergency flasher knob with short knobs. This knob is die cast and chrome plated, just like the original and features "FLASHER" lettering on the front and rear of the stem. GM licensed.

This replacement turn signal cam activator makes your turn signal automatically cancel in your steering column. It for non tilt steering columns.
Fits:
1967-68 Camaro
1967-68 Chevelle

This is a high quality reproduction of the Emergency flasher knob. This knob is die cast and chrome plated, just like the original and features "FLASHER" lettering on the front and rear of the stem. GM licensed.
1967-69 Camaro
1967-69 Firebird
1967-70 Chevelle

Replace your firewall steering column seal with this quality reproduction. Fits all 1968-72 Chevelle models.

Reproduction of the horn cap used on wood and comfort grip steering wheels.

Fits:
1967-70 Camaro
1967-70 Firebird
1968-70 Chevelle

GM hazard knob kit used to replace broken or missing emergency/hazard flasher knob on steering column.
Fits:
GM Cars & Trucks from 1977-2005

Correct reproduction horn buttons used on all 1969 Camaro and 1969-70 Chevelle steering wheels. Includes both the RH and LH horn buttons.

Fits:
1969 Camaro
1969-70 Chevelle

Tilt wheel release lever.
Fits:
1968-70 Chevelle
1968-70 Camaro
1968-70 Firebird

Correct reproduction horn buttons used on all 1969 Camaro and 1969-70 Chevelle steering wheels. Includes both the RH and LH horn buttons.

Correct reproduction horn buttons used on all 1969 Camaro and 1969-70 Chevelle steering wheels. Includes both the RH and LH horn buttons.

Fits:
1969 Camaro
1969-70 Chevelle

Correct reproduction of the original horn buttons contacts used on all 1969 Camaro and 1969-70 Chevelle standard steering wheels. Includes both the RH and LH horn button contacts.

Fits:
1969 Camaro
1969-70 Chevelle

Tilt wheel release lever.
Fits:
1971 Chevelle
1976-78 Camaro

Steering wheel contact and mounting kit for standard factory steering wheel.
Fits:
1971-72 Chevelle
1967 Camaro
1968 Camaro
1971-79 Camaro w/4 Spoke Sport Wheel

Quality reproduction of the 1969 Chevelle lower steering column cover.
Fits: 1969 Chevelle

Wood steering wheel horn contact and mounting kit without tilt column.

Fits:
1969-70 Chevelle
1969 Camaro
1969 Firebird

Kit includes: Horn cap mounting and horn contact assembly with hardware (1" inner diameter), canceling cam, pin, spring and retainer, quality high strength wheel mounting screw set.

Fits:
1969 Chevelle with Wooden Steering Wheel & Tilt
1969 Camaro with Wooden Steering Wheel & Tilt

Kit includes: Horn cap mounting and horn contact assembly with hardware (1" inner diameter), canceling cam, pin, spring and retainer, quality high strength wheel mounting screw set.

Fits:
1968 Chevelle with Wooden or Sport Steering Wheel
1967-68 Camaro with Wooden or Sport Steering Wheel

Reproduction steering coupling joint for 1967-69 Camaro models with power steering and used on other various 1959-79 GM models .

Couplier Specs:

• Shaft Size: 13/16" - 36 spline
• Total OD: 3 1/4"

Fits:

• 1967-76 Camaro
• 1967-76 Pontiac Firebird, Trans Am
• 1964-73 Chevelle
• 1959-79 Other GM Models

This is an excellent reproduction of the original horn button cap used on all 1967-69 Camaro and 1968-70 Chevelle models equipped with the optional Wood or Comfort Grip steering wheel. This cap includes the bow tie emblem in the center with a blue background with a red white and blue border. It's officially licensed by GM. Mounting ring sold separately.

Fits:
1967-69 Camaro
1968-70 Chevelle

Reproduction steering coupling joint for 1967-69 Camaro models with manual steering and used on other various 1959-82 GM models .

Couplier Specs: Shaft Size: ¾" fine spline w/o flat at bolt head side
Spline Count: 32
Total OD: 3 5/32"
Bolt Size: 5/16"
Bolt Spacing: 2-3/8" center to center
Pin Diameter: 5/16" & 3/8"
Pin Spacing: 2-1/2" center to center
Grounding Plate: no

Fits:
1967-69 Camaro
1967-69 Pontiac Firebird, Trans Am
1964-69 Chevelle
1959-82 Other GM Models

Steering wheel mounting hub use to mount Walnut steering wheels. Does not include screws.

Steering wheel mounting hub use to mount Rosewood and Comfort Grip steering wheels. Does not include screws.

Reproduction of the original black steering wheel shroud used on all 1969 Camaro and 1969-70 Chevelle models. Made to the correct plastic grain finish. This shroud will install on original GM and reproduction steering wheels. The shroud emblem and mounting screws are not included.

Fits:
1969 Camaro
1969-70 Chevelle

Reproduction of the original red steering wheel shroud used on all 1969 Camaro and 1969-70 Chevelle models. Made to the correct plastic grain finish. This shroud will install on original GM and reproduction steering wheels. The shroud emblem and mounting screws are not included.

Fits:
1969 Camaro
1969-70 Chevelle

Reproduction of the original dark blue steering wheel shroud used on all 1969 Camaro and 1969-70 Chevelle models. Made to the correct plastic grain finish. This shroud will install on original GM and reproduction steering wheels. The shroud emblem and mounting screws are not included.

Reproduction of the original dark green steering wheel shroud used on all 1969 Camaro and 1969-70 Chevelle models. Made to the correct plastic grain finish. This shroud will install on original GM and reproduction steering wheels. The shroud emblem and mounting screws are not included.

Fits:
1969 Camaro
1969-70 Chevelle

Reproduction of the 15" three spoke comfort grip steering wheel used on all 1967-68 Camaro models.

Fits:
1969-70 Chevelle
1967-69 Camaro

Reproduction of the original black steering wheel used on all 1969 Camaro models.
Fits:
1969 Camaro
1969-70 Chevelle

Reproduction of the original dark blue steering wheel used on all 1969 Camaro Chevelle models.

Fits:
1969 Camaro
1969-70 Chevelle